Exhaust `U` Bolt Clamp 32mm
Exhaust `U` Bolt Clamp 35/36mm
Exhaust `U` Bolt Clamp 35/36mm
Exhaust `U` Bolt Clamp 38mm - For 918cc Side-Valve exhaust downpipe to silencer joint.
Exhaust `U` Bolt Clamp 42mm
Exhaust (Stainless Steel) Van/Pick-Up (3-Piece)
Exhaust (Stainless) Van/Pick-Up models ONLY. Standard 1 1/4" bore. You may require fitting kit part no. EX117 or EX117C.
Exhaust / Manifold Clamp (Std Size) CAST MMC Bath
Exhaust / Manifold Clamp (Std Size) Made by MMC Bath in top quality carbon steel with brass nuts.
Exhaust 918cc Side-Valve (Stainless Steel) Saloon/Convertible
Exhaust 918cc Side-Valve (Stainless) Saloon/Convertible
Exhaust Downpipe - Marina (Stainless)
Exhaust Downpipe for Marina single outlet cast manifold. It fits to the EX126 / EX126MS exhaust systems.This stainless steel downpipe is a revised shape with an improved flange for a better fit to the manifold. It is slightly longer than the previously available item.This is necessary to improve fit and exhaust sealing with some exhausts, however it can also be shortened if necessary.This is not suitable for the Morris Ital twin outlet manifold which requires EX124. EX125 LCB manifold can be used in place of all manifold/downpipe combinations when using a large bore exhaust system.
Exhaust Downpipe-Marina *** MILD STEEL ***
Exhaust Downpipe for Marina single outlet cast manifold. It fits to the EX126 / EX126MS exhaust systems.This mild steel downpipe offers a budget way of connecting a large bore exhaust system to a Marina cast manifold. However the flange that connects it to the manifold is inferior to the type used on our EX123 downpipe.This is not suitable for the Morris Ital twin outlet manifold which requires EX124. EX125 LCB manifold can be used in place of all manifold/downpipe combinations when using a large bore exhaust system.
Exhaust End Pipe Finisher (Straight) STD CHROME
Exhaust End Pipe Finisher (Straight) STD Chrome - Internal diameter 32.8mm approx. Not suitable for aluminised exhaust systems.
Exhaust Fitting Kit - 918cc Side-Valve Only
Exhaust Fitting Kit - 918cc Side-Valve Only
Exhaust Fitting Kit - Van & Pick-Up Only (With ORIGINAL Type Mounts) *CAST CLAMP*
Exhaust Fitting Kit - Van & Pick-Up Only (With ORIGINAL Type Mounts) *CAST CLAMP*
Exhaust Fitting Kit - Van & Pick-Up Only (With ORIGINAL Type Mounts) *PRESSED STEEL CLAMP*
Exhaust Fitting Kit - Van & Pick-Up Only (With ORIGINAL Type Mounts)
Exhaust Fitting Kit O.H.V Saloon/Traveller/Convertible *CAST CLAMP*
Exhaust Fitting Kit O.H.V Saloon/Traveller/Convertible with CAST manifold clamp.
Exhaust Fitting Kit O.H.V Saloon/Traveller/Convertible *PRESSED STEEL CLAMP*
Exhaust Fitting Kit O.H.V Saloon/Traveller/Convertible. With pressed type steel clamp.
Exhaust Heatshield & Pad (Fits Under Floor)
Exhaust Heatshield & Pad (Fits Under Floor) screws= FIX130A x4 nuts=FIX130 x4 washers=FIX156
Exhaust Mounting Bracket (Fits To Strap)
Exhaust Mounting Bracket (Fits To Strap)
Exhaust Mounting Bracket (For 'U' Bolt Clamp)
Exhaust Mounting Bracket (For 'U' Bolt Clamp)
Exhaust O.H.V (Steel) Van & Pick-Up ALUMINISED 3-PIECE
Aluminised 3-piece exhaust for OHV Van & Pick-Up ONLY. Standard 1 1/4" bore. Supplied with 2 joining clamps.
Exhaust O.H.V Mild Steel Saloon/Traveller/Convertible ALUMINISED 3-PIECE
Aluminised steel 3-piece exhaust system for OHV Saloon, Traveller and Convertible models ONLY. Standard 1 1/4" bore. Supplied with two joining clamps.
Exhaust O.H.V Saloon/Traveller/Convertible STAINLESS STEEL 3-PIECE
Exhaust O.H.V Saloon/Traveller/Convertible STAINLESS STEEL 3-PIECE. Standard 1 1/4" bore. Supplied with 2 joining clamps.
Exhaust Pipe joiner(Straight) (gauge fits ex101)
Exhaust pipe joiner (used to join 2 parts of straight exhaust pipe). we use this part to re-join standard mild steel system ex101 when it has been cut due to carriage length restrictions.
Exhaust Strap (Long/Centre)
Exhaust Strap (Long/Centre) CANVAS
Exhaust Strap (Long/Centre) CANVAS Like the original.
Exhaust Strap (Short/Rear)
Exhaust Strap (Short/Rear) CANVAS
Exhaust Strap (Short/Rear) CANVAS Like the original.
Exhaust/Manifold Clamp (Std Size) Heavy Duty
Exhaust/Manifold Clamp (Std Size) Heavy Duty
Large Bore Exhaust "U" Clamp 45mm (3 Required) Each
Large Bore Exhaust "U" Clamp 45mm (3 Required) Each
Large Bore Exhaust Mounting Strap (2 Required) Each
Large Bore Exhaust Mounting Strap (2 Required) Each
Large Bore Exhaust System (Twin Box) ***STAINLESS STEEL*** (2 Piece System EXCLUDING Downpipe)
Large Bore Exhaust System (Twin Box) ***STAINLESS STEEL*** (2 Piece System EXCLUDING Downpipe) This exhaust is useful when fitting 1275cc/1300 engines. It can also be fitted to 948/1098 engines using an appropriate manifold. Internal diameter 1.5 inch.This exhaust system requires the use of a suitable downpipe to connect to Marina (EX123) or Ital (EX124) exhaust manifolds. Alternatively use EX125 LCB manifold in place of manifold and downpipe to connect between cylinder head and exhaust.Use 2 x EX128 mounting strap and 3 x EX127 to hang the exhaust.
Large Bore Exhaust System (Twin Box) ALUMINISED
Large Bore Exhaust System (Twin Box) ALUMINISED. Larger 1 1/2" bore. Not suitable for van/pickup.
Large Bore L.C.B. Exhaust Manifold (Stainless)
L.C.B. Exhaust Manifold (Stainless). Internal Diameter 1.5 inch.This exhaust manifold can be used for replacing all OHV exhaust manifolds and down-pipes when fitting to an EX126 large-bore exhaust system. It is designed for use with a twin-carburettor inlet manifold as the original Minor inlet manifold will foul on the centre branch. Twin carburettors will require adaption to fit with this manifold by spacing further away from the cylinder head.
Long Bolt & Nut (For EX113) Exhaust Clamp
Long Bolt & Nut (For EX113) Exhaust Clamp
SECOND-HAND Inlet/Exhaust Manifold - 803cc
Inlet/Exhaust Manifold - 803cc *Two Piece Manifold* Second-Hand
SECOND-HAND Inlet/Exhaust Manifold - 948/1098cc
Inlet/Exhaust Manifold - 948/1098cc *One Piece Cast Manifold* Second-Hand
SECOND-HAND Inlet/Exhaust Manifold - 948cc
Inlet/Exhaust Manifold - 948cc *Two Piece Manifold* Second-Hand
Van/Pick-Up Exhaust Mounting (As Original)
Van/Pick-Up Exhaust Mounting (As Original).
Washer - Exhaust Mounting Strap 1/4" x 1"
Washer - Exhaust Mounting Strap 1/4" x 1"