Banjo Bolt-Front Brake Cylinder (3/8" BSF MM & Series II)

Banjo Bolt-Front Brake Cylinder (3/8" BSF MM & Series II)

Bolt & Nut (Secures Brake Back Plate To King-Pin) & Rear Axle To Backplate

Bolt & Nut (Secures Brake Back Plate To King-Pin) & Rear Axle To Backplate

Brake Bleed Screw / Bleed Nipple - Front (3/8" UNF Thread)

Brake Bleed Screw / Bleed Nipple - Front (3/8" UNF Thread)

Brake Drum Screw Countersunk (Front Short)

Brake Drum Screw Countersunk (Front Short)

Brake Shoe Adjuster Cam & Mask - OVERSIZE (8" Front Brakes) **SEE NOTES**

These oversize cams are deigned for use with skimmed brake drums to return the normal range of adjustment. At the lowest adjustment setting they are 1/8" taller. If you have standard sized or new drums please use FBK109.

Brake Shoe Adjuster Cam & Mask (7" Brakes)

High quality reproduction made to original specification.

Brake Shoe Adjuster Cam & Mask (7" Brakes) *SET OF 4*

High quality reproduction made to original specification.

Brake Shoe Adjuster Cam & Mask (8" Brakes)

High quality reproduction made to original specification.

Brake Shoe Adjuster Cam & Mask (8" Brakes) *SET OF 4*

High quality reproduction made to original specification.

Brake Shoe Tension Spring (7" Front Brakes)

Brake Shoe Tension Spring (7" Front Brakes)2x required per drum

Brake Shoe Tension Spring (8" Front Brakes)

Brake Shoe Tension Spring (8" Front Brakes)2x required per drum

Front Brake Conversion Kit-MM & Series II Models ***WITHOUT BRAKE BACK PLATES***

Front Brake Conversion Kit - MM & Series II Models To Later Type Cylinders (Retains Original 7" Drums) ***WITHOUT BRAKE BACK PLATES*** You will need to source the 7" Minor 1000 type brake back plates to fit this kit. You will also need to re-use your existing brake adjuster cams & masks.

Front Brake Cylinder L/H - MM & Early Series II (Aluminium) AAA476 / 69108

Made to original specification including BSF studs (for fixing nuts use FIX131). Repalcement seals are available (FBK130)Fits vehicles up to December 1953; chassis number 228267 (car) 216901(traveller)If all 4 front cylinders are required please use FBK128/9A for a discounted price

Front Brake Cylinder R/H - MM & Early Series II (Aluminium) AAA475 / 69107

Made to original specification including BSF studs (for fixing nuts use FIX131). Repalcement seals are available (FBK130)Fits vehicles up to December 1953; chassis number 228267 (car) 216901(traveller)If all 4 front cylinders are required please use FBK128/9A for a discounted price

Front Brake Cylinder Repair Kit - 15/16" December 1953 Onwards

Front Brake Cylinder Repair Kit - 15/16" December 1953 Onwards **Not suitable for LPR pattern cylinders** .

Front Brake Cylinder Repair Kit - 7/8"

Front Brake Cylinder Repair Kit - 7/8" 1948 to 1953

Front Brake Drum (8" Diameter) Minor 1962-1971 (Also A40 Farina) *Made to Original Specification*

Original specification high quality brake drum.Fitted on the front from 1962-1971.

Front Brake Drum (8" Diameter) Minor 1962-1971 (Also A40 Farina) PATTERN

Front Brake Drum (8" Diameter) 1962-1971 (Also A40 Farina) PATTERN

Front Brake Shoes (Set 4) Minor 1000 1962-1971 (Also A40 Farina) 8" Diameter (8G8767)

Front Brake Shoes (Set 4) Morris Minor 1962-1971 & Austin A40 Farina - 8" Diameter

Front Brake Wheel Cylinder L/H 1954-1971 (Pattern) 2 Required (GWC111) *NOT MM & EARLY SERIES II*

Please Note, Repair Kits are not available for these pattern cylinders.

Front Brake Wheel Cylinder L/H 1954-1971 Original Lockheed Design (2 Required Per side) (GWC111) *NOT MM & EARLY SERIES II*

Suitable for chassis no. 228267 (December 1953) onwards. For earlier cars use FBK129A.These cylinders are of original Lockheed design using 15/16” cup seals as with Lockheed cylinders. These can be replaced using FBK107.If you are buying a set of 4 cylinders please use part number FBK105/6A for a further discount.When fitting new cylinders & shoes on the 7" front brakes it can sometimes be difficult to get the brake drum on. If this does occur, loosen the wheel cylinder fixing screws, fit the brake drum and then re-tighten the wheel cylinder screws.

Front Brake Wheel Cylinder R/H 1954-1971 (Pattern) 2 Required (GWC110) *NOT MM & EARLY SERIES II*

Please Note, Repair Kits are not available for these pattern cylinders.

Front Brake Wheel Cylinder R/H 1954-1971 Original Lockheed Design (2 Required Per Side) (GWC110) *NOT MM & EARLY SERIES II*

Suitable for chassis no. 228267 (December 1953) onwards. For earlier cars use FBK128A.These cylinders are of original Lockheed design using 15/16” cup seals as with Lockheed cylinders. These can be replaced using FBK107.If you are buying a set of 4 cylinders please use part number FBK105/6A for a further discount.When fitting new cylinders & shoes on the 7" front brakes it can sometimes be difficult to get the brake drum on. If this does occur, loosen the wheel cylinder fixing screws, fit the brake drum and then re-tighten the wheel cylinder screws.

GRUMPY Disc Brake Kit ( Marina based ) *See Product Information

Mr Grumpys Disc Brake Conversion Kit . This kit is based on the original Marina disc brake kit. The kit includes brand new, non exchange calipers so no need to find old units and no surcharges. The hubs are also new and do not require exhange units or surcharging. They are Marina based, using the same bearings as fitted in the MMC Ford Vented Kit. They come supplied with outer races fitted. The stud pattern is for standard Minor Wheels. We strongly advise the fitment of the remote reservoir kit FBK901 in conjunction with the disc conversion to increase the fluid capacity in the braking system to a suitable level. All other parts required to fit the kit are supplied. See photo for further detail.Fits vehicles from December 1953 - Car No. 228267 onwards, Traveller No. 216901 onwards*PLEASE NOTE: Not available for export to USA and Canada.

Marina Pedal Box Conversion Housing

Marina Pedal Box Conversion Housing. Allows fitment of Marina pedal box to Minor. Marina pedal box and pedals are only available second-hand and would need to be sourced separately.

Plug - Front Brake Drum (8" Diameter) 1962-1971 AHH5514

Plug - Front Brake Drum (8" Diameter) 1962-1971 AHH5514

Retainer - Steady Spring for Brake Shoe (17H7971)

Retainer - Steady Spring for Brake Shoe (17H7971)

Screw-Brake Cylinder To Back Plate (Large Head)

Screw-Brake Cylinder To Back Plate (Large Head) (1 per cylinder required along with FBK118 or FBK118A)

Screw-Brake Cylinder To Back Plate (Small Head) Original

Screw-Brake Cylinder To Back Plate (Small Head) Original (1 per cylinder and 1 fbk119 per cylinder) altenative for this is FBK118A if allen head fitting required.

Screw-Brake Cylinder To Back Plate (Socket Head)

Screw-Brake Cylinder To Back Plate (Socket Head) can be used in place of FBK118, 1 per cylinder required. (along with 1x FBK119 per cylinder)

SET of 4 Front Brake Cylinders - MM & Series II (Aluminium) AAA475 / 69107

Made to original specification including BSF studs (for fixing nuts use FIX131). Repalcement seals are available (FBK130)Fits vehicles up to December 1953; chassis number 228267 (car) 216901(traveller)

Set of 4 Front Brake Cylinders 1954-1971 - PATTERN *NOT MM & EARLY SERIES II*

Suitable for chassis no. 228267 (December 1953) onwards. For earlier cars use FBK128A/129A.

Set of 4 Front Brake Cylinders 1954-1971 Original Lockheed Design *NOT MM & EARLY SERIES II*

Suitable for chassis no. 228267 (December 1953) onwards. For earlier cars use FBK128A/129A.These cylinders are of original Lockheed design using 15/16” cup seals as with Lockheed cylinders. These can be replaced using FBK107.When fitting new cylinders & shoes on the 7" front brakes it can sometimes be difficult to get the brake drum on. If this does occur, loosen the wheel cylinder fixing screws, fit the brake drum and then re-tighten the wheel cylinder screws.

Spring for Steady Pin for Brake Shoe Retainer (17H7969)

Spring - Steady Pin for Brake Shoe Retainer (17H7969)