Bee Hive Spring (2 Req Per Side)
Bee Hive Spring2x required per drum
Brake Bleed Screw / Bleed Nipple (3/8" BSF Thread) Fits front MM and SII and Rear all October 1956-On
Rear Brake Drum (7" Diameter) PATTERN.Minor – Front 1953-1962/Rear 153-1971A30 & A35 – Front and Rear All ModelsA40 Farina - Rear All Models
Original specification high quality brake drum. Fitted on the rear of all Minor models from 1953-Onwards. Fitted on the front from 1953-62 only. Not suitable for MM & Series II.
Brake Drum Screw C/S (Rear-Long)
Brake Drum Screw C/S (Rear-Long)
Brake Shoe Adjuster Cam & Mask (7" Brakes)
High quality reproduction made to original specification.
Brake Shoe Adjuster Cam & Mask (7" Brakes) *SET OF 4*
High quality reproduction made to original specification.
Brake Shoe Tension Spring (Long) AAA4778 1 Per Side
Brake Shoe Tension Spring AAA4778 (Long)1x required per drum, used in conjunction with RBK109 x1 and RBK111 x2
Brake Shoe Tension Spring (Short) AAA4777 1 Per Side
Brake Shoe Tension Spring (Short) AAA47771x required per drum, used in conjunction with RBK110 x1 and RBK111 x2
Brass Banjo-Rear Brake & Master Cylinder
Brass Banjo-Rear Brake Cylinder (Bleed Screw Fits Into) & Brake Master Cylinder Connection
Connector - Banjo To Rear Brake & Master Cylinder
Connector For Brass Banjo To Rear Brake Cylinder & Brake Master Cylinder Connection
Copper Washer (Large 7/16" I.D.)
Copper Washer (Large 7/16" I.D.) For Rear Brake Cylinder & Brake Master Cylinder Connection
Copper Washer, Brake Hose (Small 3/8" I.D.)
Copper Washer (Small 3/8" I.D.) For Rear Brake Cylinder & Brake Master Cylinder Connection
Dust Cap for Rear Brake Drum
Rear Brake Back Plate L/H (1953-On All Models) RECONDITIONED
Rear Brake Back Plate L/H (1953-On All Models) RECONDITIONED
Rear Brake Cylinder Repair Kit 3/4" 1962 Onwards
Rear Brake Cylinder Repair Kit 3/4" (Genuine Cylinders) 1962 onwards
Rear Brake Cylinder Repair Kit 7/8" 1948-1962 *For Genuine Cylinders Only*
Rear Brake Cylinder Repair Kit 7/8"(Genuine Cylinders) (1948-1962) **For Lockheed cylinders. Not suitable for pattern cylinders** There are no repair kits available for pattern cylinders.
Rear Brake Cylinder Rubber Boot/Dust Cover
Rear Brake Cylinder Rubber Boot/Dust Cover
Rear Brake Cylinder-1948>1962 7/8" Bore (Pattern)
Rear Brake Cylinder-1948>1962 7/8" Bore (Pattern)
Rear Brake Shoes-Set 4 (7" All Models)
Rear Brake Shoes-Set 4 (7" All Models)
Rear Brake Cylinder-1962>1971 3/4" Bore (Lockheed/Delphi) LW11287 NOTES: This part can be used as a replacement for the 7/8" bore cylinder fitted to pre '62 models. Ensure both cylinders are changed.
Rear Brake Wheel Cylinder-1962>1971 3/4" Bore (Pattern) *SEE NOTES*
Rear Brake Cylinder-1962>1971 3/4" Bore (Pattern) NOTES: This part can be used as a replacement for the 7/8" bore cylinder fitted to pre 1962 models. Ensure both cylinders are changed.
SET OF 4 Bee Hive Springs (2 Required Per Side)
SET OF 4 Bee Hive Springs (2 Required Per Side)