Bolt - Crownwheel To Carrier (ATA7043)

Bolt-Crownwheel To Carrier (ATA7043)

Bolt & Nut ( Rear Damper To Bracket & Inner Wishbone )

Bolt & Nut (Rear Damper To Bracket)

Bolt & Nut (Propshaft To Differential) BSF Thread (EACH)

Bolt & Nut (Propshaft To Differential) Original BSF Thread (EACH)

Bolt & Nut Kit (Propshaft To Differential) UNF Thread *SET OF 4*

Bolt & Nut Kit (Propshaft To Differential) *SET OF 4* Please note these are UNF thread.

Brake Pipe to Rear Axle Strap (Each)

Breather-Rear Axle

Breather-Rear Axle

Breather-Rear Axle BRASS Type (Not Original)

Breather-Rear Axle BRASS Type (Not Original)

Clamp - Rear Leaf Spring (SMALL 2 LEAVES)

Clamp - Rear Leaf Spring (SMALL 2 LEAVES)

Coil-Over Damper Conversion Kit-Rear (SPAX ADJUSTABLE) *NOT VAN or PICK-UP*

Coil-Over Damper Conversion Kit-Rear (SPAX) *NOT SUITABLE FOR VAN & PICK-UP*

Complete Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) POLYURETHANE BUSHES

Complete Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) POLYURETHANE BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Polyurethane Locating Pads, 4 x Metal Locating Plates, 12 x Polyurethane Spring/Shackle Bushes, 4 x Shackle Pins,Nuts & Washers, 4 x Shackle Plates, 2 x Front Locating Pins, Nuts & Washers, 2 x Front Pin Locating Plates with Nuts, Bolts & Washers 2 x Bump Stops.

Complete Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) RUBBER BUSHES

Complete Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) RUBBER BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Rubber Locating Pads, 4 x Metal Locating Plates, 12 x Rubber Spring/Shackle Bushes, 4 x Shackle Pins,Nuts & Washers, 4 x Shackle Plates, 2 x Front Locating Pins, Nuts & Washers, 2 x Front Pin Locating Plates with Nuts, Bolts & Washers & 2 x Bump Stops

Complete Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) POLYURETHANE BUSHES

Complete Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) POLYURETHANE BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Polyurethane Locating Pads, 4 x Metal Locating Plates, 12 x Polyurethane Spring/Shackle Bushes, 4 x Shackle Pins,Nuts & Washers, 4 x Shackle Plates, 2 x Front Locating Pins, Nuts & Washers, 2 x Front Pin Locating Plates with Nuts, Bolts & Washers 2 x Bump Stops.*BUSH COLOURS MAY VARY*

Complete Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) RUBBER BUSHES

Complete Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) RUBBER BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Rubber Locating Pads, 4 x Metal Locating Plates, 12 x Rubber Spring/Shackle Bushes, 4 x Shackle Pins,Nuts & Washers, 4 x Shackle Plates, 2 x Front Locating Pins, Nuts & Washers, 2 x Front Pin Locating Plates with Nuts, Bolts & Washers 2 x Bump Stops.

Complete Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) POLYURETHANE BUSHES

Complete Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) POLYURETHANE BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Polyurethane Locating Pads, 4 x Metal Locating Plates, 12 x Polyurethane Rear Spring/Shackle Bushes, 4 x Shackle Pins,Nuts & Washers & 4 x Shackle Plates & 2 x Bump Stops.

Complete Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) RUBBER BUSHES

Complete Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) RUBBER BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Rubber Locating Pads, 4 x Metal Locating Plates, 12 x Rubber Spring/Shackle Bushes, 4 x Shackle Pins,Nuts & Washers & 4 x Shackle Plates & 2 x Bump Stops.

Crown Wheel & Pinion (New) 4.22:1

Crown Wheel & Pinion (New) 4.22:1

Differential - Reconditioned - 4.55:1 (9/41) £329.00 + £175.00 Surcharge Included *Click Here For More Details*

A fully reconditioned 4.55:1 differential. Reconditioned DIF108 (Exchange) Differential. *Surcharge DIF108SC of £175.00 excluding vat is included in this purchase price.* Please note that this is an exchange item and it requires a serviceable exchange unit from you of the exact same type and specification. On receiving a serviceable exchange unit from you we will issue a credit for the surcharge amount. All return carriage costs are the responsibility of the customer. We thank you for your co-operation in returning exchange units so allowing the continuation of the availability of these parts in the future. We appreciate the return of all exchange units as soon as is practicably possible.

Differential Pinion (Planet Gear) 2A7015

Differential Pinion (Planet Gear) 2A7015

Differential PINION Flange Retaining Nut

Differential PINION Flange Retaining Nut

Differential PINION Flange Retaining Nut Spring Washer

Differential PINION Flange Retaining Nut Spring Washer

Differential Pinion Inner Bearing-Early

Differential Pinion Inner Bearing-Early Fits 4.55 Differential

Differential Pinion Inner Bearing-Late

Differential Pinion Inner Bearing-Late

Differential Pinion Oil Seal (MM & Series II Axle) (101850)

Diff Pinion Oil Seal (MM & Series II Axle)Suitable for cars with a "split-casing" rear axle used up to December 1953 (car number 2282677). Not suitable for A-type "banjo" axles.

Differential Pinion Oil Seal ATA7047 88G320 (1954-71)

Differential Pinion Oil Seal. For all models from 1954-71.

Differential Pinion Outer Bearing-Early (2A7213)

Differential Pinion Outer Bearing-Early Fits 4.55 Differential

Differential Pinion Outer Bearing-Late (BTB440)

Differential Pinion Outer Bearing-Late

Differential Side Bearing

Differential Side Bearing

EARLY TYPE Rear Shock Absorber/Damper-L/H Reconditioned £34.25 + £50.00 Surcharge Included *Click Here For More Details*

A fully reconditioned L/H rear shock absorber / damper for all models excluding van & pick-up. Reconditioned SUS701E (Exchange) Shock Absorber/Damper. *Surcharge SUS701SC of £50.00 excluding vat is included in this purchase price.* Please note that this is an exchange item and it requires a serviceable exchange unit from you of the exact same type and specification. On receiving a serviceable exchange unit from you we will issue a credit for the surcharge amount. All return carriage costs are the responsibility of the customer. We thank you for your co-operation in returning exchange units so allowing the continuation of the availability of these parts in the future. We appreciate the return of all exchange units as soon as is practicably possible.

EARLY TYPE Rear Shock Absorber/Damper-R/H Reconditioned £34.25 + £50.00 Surcharge Included *Click Here For More Details*

A fully reconditioned R/H rear shock absorber / damper for all models excluding van & pick-up. Reconditioned SUS700E (Exchange) Shock Absorber/Damper. *Surcharge SUS700SC of £50.00 excluding vat is included in this purchase price.* Please note that this is an exchange item and it requires a serviceable exchange unit from you of the exact same type and specification. On receiving a serviceable exchange unit from you we will issue a credit for the surcharge amount. All return carriage costs are the responsibility of the customer. We thank you for your co-operation in returning exchange units so allowing the continuation of the availability of these parts in the future. We appreciate the return of all exchange units as soon as is practicably possible.

Extra Long "U" Bolt For Lowered Rear Suspension (Up To 2" Lower)

Extra Long "U" Bolt For Lowered Rear Suspension (Up To 2" Lower)

Eyebolt/Rear Spring Shackle Bush - HIGH QUALITY NATURAL RUBBER (4 Per Spring)

Rear Shackle Bush - HIGH QUALITY NATURAL RUBBER. as to original spec. 4 required per spring plus 2 for each upper shackle. See SUS400 for rear spring kit. These have been remanufactured by Morris Minor Centre (Bath) Ltd and are embossed with MMC

Flat Washer 1/2" I.D. x 1.1/2" O.D. (PWZ208)

Flat Washer 1/2" I.D. x 1.1/2" O.D. PWZ208

Flat Washer 3/8" I.D. x 1.1/4" O.D. (AJD7232)

Flat Washer 3/8" I.D. x 1.1/4" O.D. (AJD7232)

Flat Washer 7/16" I.D. x 1.1/2" O.D. H/D 1/8" THICK (PWZ207)

Flat Washer 7/16" I.D. x 1.1/2" O.D. H/D 1/8" THICK (PWZ207)

Gasket-Differential To Axle Casing (2A7027)

Gasket-Differential To Axle Casing)

Genuine Rear Shock Absorber/Damper - L/H (New Old Stock) ACA5117

Original British Leyland in export packaging.

Hub Nut-Rear L/H 1G3584

Hub Nut-Rear L/H. Please note: These hub nuts are 46mm (originals are 1 1/8” Whitworth). The hub nut tool suitable for replacement hub nuts can be found under part number ACC094.

Hub Nut-Rear R/H 2A7103

Hub Nut-Rear R/H. Please note: These hub nuts are 46mm (originals are 1 1/8” Whitworth). The hub nut tool suitable for replacement hub nuts can be found under part number ACC094.

Lock Washer-Rear Hub Nut 2A7250

Lock Washer-Rear Hub Nut

Lockwasher-Crownwheel Bolt (ATA7044)

Lockwasher-Crownwheel Bolt (ATA7044)

Metal Plate - Locating - Front Pin

Metal Plate - Locating - Front Pin. Fixing bolt = FIX130A nut = FIX130 washer= FIX156

Metal Plate (For Locating Rear Spring To "U" Bolts)

Metal Plate (For Locating Rear Spring To "U" Bolts)

NON STANDARD Rear Spring Front Bush - Polyurethane (4 Per Car) FOR FITTING 8-LEAF SPRING

Hybrid bush to fit 8-leaf springs to a saloon, traveller or convertible (Polyurethane)

Pad - Polyurethane (Fits Either Side Of Road Spring)

Pad - Rubber (Fits Either Side Of Road Spring)

Rubber Pad (Fits Either Side Of Road Spring)

Pin-Differential Pinion 2A7016

Pin-Differential Pinion 2A7016

Plug-Oil Filler & Drain-Differential (6K499)

Plug-Oil Filler & Drain-Differential. Uses 3/8" Allen key. 2 required per diff.

Polyurethane Bush-Link To Chassis (2 Required Per Side)

Polyurethane Bush-Link To Chassis (2 Required Per Side)

Propshaft (803/948/1098cc) Second-Hand

Propshaft (803/948/1098cc) Second-Hand

Propshaft Universal Joint (With Grease Nipple) GUJ115

Propshaft Universal Joint (With Grease Nipple) GUJ115

Rear Axle Mounting Bracket Repair L/H (Not MM)

Rear Axle Mounting Bracket Repair L/H (Not MM) Old ESM Part No DIF105L Part No changed 01.06.09. These brackets are made in U.K.

Rear Axle Mounting Bracket Repair R/H (Not MM)

Rear Axle Mounting Bracket Repair R/H (Not MM) Old ESM Part No DIF105R Part No changed 01.06.09. These brackets are made in The U.K..

Rear Bump Stop Rubber-Fits To Axle (21G5162)

Rear Bump Stop Rubber-Fits To Axle (21G5162)

Rear Half Shaft / Hub Gasket - Dec 1953 Onwards. 2A7091 GFG110 ***0.006" Thick***

Rear Half-Shaft / Hub Gasket - For later type rear axle only. Chassis no. 228267 (Dec 1953) onwards. These are the correct original thickness 0.006"

Rear Hub "O" Ring-Rubber ATA7225

Rear Hub "O" Ring-Rubber

Rear Hub Oil Seal ( A-Type Axle December 1953 Onwards ) DOUBLE LIP TYPE BTA108 GHS147

Superior Double-Lip type for better sealing on old / worn axles. NOT recommended for use on re-sleeved axles - USE DIF149A

Rear Hub Oil Seal ( A-Type Axle December 1953 Onwards ) SINGLE LIP TYPE BTA108 GHS147

Recommended for use on re-sleeved axles.

Rear Hub Oil Seal (MM & Series II Axle)

Rear Hub Oil Seal (MM & Series II Axle)Suitable for cars with a "split-casing" rear axle used up to December 1953 (car number 2282677). Not suitable for A-type "banjo" axles.

Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) POLYURETHANE BUSHES

Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) POLYURETHANE BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Polyurethane Locating Pads, 12 x Polyurethane Rear Spring/Shackle Bushes, 4 x Shackle Pins & Nuts & 2 x Front Locating Pins & Nuts.*BUSH COLOURS MAY VARY*

Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) RUBBER BUSHES

Rear Leaf Spring Kit - 5 Leaf Springs (Saloon/Convertible) RUBBER BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Rubber Locating Pads, 12 x Rear Spring/Shackle Bushes, 4 x Shackle Pins & Nuts & 2 x Front Locating Pins & Nuts.

Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) POLYURETHANE BUSHES

Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) POLYURETHANE BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Polyurethane Locating Pads, 12 x Polyurethane Rear Spring/Shackle Bushes, 4 x Shackle Pins & Nuts & 2 x Front Locating Pins & Nuts.*BUSH COLOURS MAY VARY*

Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) RUBBER BUSHES

Rear Leaf Spring Kit - 7 Leaf Springs (Traveller) RUBBER BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Rubber Locating Pads, 12 x Rear Spring/Shackle Bushes, 4 x Shackle Pins & Nuts & 2 x Front Locating Pins & Nuts.

Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) POLYURETHANE BUSHES

Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) POLYURETHANE BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Polyurethane Locating Pads, 12 x Rear Spring/Shackle Bushes & 4 x Shackle Pins & Nuts.*BUSH COLOURS MAY VARY*

Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) RUBBER BUSHES

Rear Leaf Spring Kit - 8 Leaf Springs (Van & Pick-Up) RUBBER BUSHESKit includes: 2 x Leaf Springs, 4 x U-Bolts & Nuts, 4 x Rubber Locating Pads, 12 x Rear Spring/Shackle Bushes & 4 x Shackle Pins & Nuts.

Rear Lowering Block Kit - Lowers Rear by 1.25" (32mm)

Rear Lowering Block Kit - Lowers Rear by 1.25" (32mm) Includes a pair of aluminium blocks, 4 U bolts & nyloc nuts.

Rear Radius Arm Kit *Not suitable for Van or Pick-Up*

Rear Radius Arm Kit This Bolt On Kit is the Final Solution to axle tramp that will not go away, easily fitted (No Welding Required) *Not suitable for Van or Pick-Up*

Rear Road Spring-5 Leaf Saloon/Convertible (Top Quality)

Rear Road Spring-5 Leaf Saloon/Convertible (Top Quality) 42.5" eye centre to eye centre.

Rear Road Spring-7 Leaf Traveller (Top Quality)

Rear Road Spring-7 Leaf Traveller (Top Quality)

Rear Road Spring-8 Leaf Van/Pick-Up (Top Quality)

Rear Road Spring-8 Leaf Van/Pick-Up (Top Quality). Can be fitted to Saloon/Traveller models using special front bushes part no. SUS727A.

Rear Shackle Metal Plate (2 Required Per Side)

Rear Shackle Metal Plate (2 Required Per Side)

Rear Shackle/Eye-Bolt Pin

Eye-Bolt Pin (1 Required Per Side) Rear Shackle Pin (2 Required Per Side) nut=FIX132 washer= FIX158

Rear Shock Absorber / Damper Drop Link Arm (To Chassis) With Bush

Rear Shock Absorber / Damper Drop Link Arm (To Chassis) nut= FIX132 washer = FIX158Includes rubber bush at chassis end of link.

Rear Shock Absorber / Damper Mounting Bracket - L/H (Not Van/Pick-Up) SECOND-HAND

Good second-hand angle bracket for mounting the rear shock absorber / damper to the rear axle.

Rear Shock Absorber / Damper Mounting Bracket - R/H (Not Van/Pick-Up) SECOND-HAND

Good second-hand angle bracket for mounting the rear shock absorber / damper to the rear axle.

Rear Shock Absorber/Damper-L/H NEW Original Spec.

Rear Shock Absorber/Damper-L/H NEW Original Spec. OUTRIGHT SALE These are brand new remanufactured to original spec. They are non exchange so do not require a surcharge unlike our reconditioned shocks. Don't throw away old units! Let us know if you have unwanted old units- we can arrange for collection for minimum quantity of two and will pay for larger quantities. IMPORTANT NOTE: New dampers will need to be left to stand upright for 24 hours prior to fitting.

Rear Shock Absorber/Damper-L/H Reconditioned £44.50 + £50.00 Surcharge Included *Click Here For More Details*

A fully reconditioned L/H rear shock absorber / damper for all models excluding van & pick-up. Reconditioned SUS701 (Exchange) Shock Absorber/Damper. *Surcharge SUS701SC of £50.00 excluding vat is included in this purchase price.* Please note that this is an exchange item and it requires a serviceable exchange unit from you of the exact same type and specification. On receiving a serviceable exchange unit from you we will issue a credit for the surcharge amount. All return carriage costs are the responsibility of the customer. We thank you for your co-operation in returning exchange units so allowing the continuation of the availability of these parts in the future. We appreciate the return of all exchange units as soon as is practicably possible.

Rear Shock Absorber/Damper-R/H NEW Original Spec.

Rear Shock Absorber/Damper-R/H NEW Original Spec. OUTRIGHT SALE These are brand new remanufactured to original spec. They are non exchange so do not require a surcharge unlike our reconditioned shocks. Don't throw away old units! Let us know if you have unwanted old units- we can arrange for collection for minimum quantity of two and will pay for larger quantities. IMPORTANT NOTE: New dampers will need to be left to stand upright for 24 hours prior to fitting.

Rear Shock Absorber/Damper-R/H Reconditioned £44.50 + £50.00 Surcharge Included *Click Here For More Details*

A fully reconditioned R/H rear shock absorber / damper for all models excluding van & pick-up. Reconditioned SUS700 (Exchange) Shock Absorber/Damper. *Surcharge SUS700SC of £50.00 excluding vat is included in this purchase price.* Please note that this is an exchange item and it requires a serviceable exchange unit from you of the exact same type and specification. On receiving a serviceable exchange unit from you we will issue a credit for the surcharge amount. All return carriage costs are the responsibility of the customer. We thank you for your co-operation in returning exchange units so allowing the continuation of the availability of these parts in the future. We appreciate the return of all exchange units as soon as is practicably possible.

Rear Spring / Shackle Pin & Bush Kit - Polyurethane (Saloon, Traveller, Convertible)

Rear Spring / Shackle Pin & Bush Kit - Polyurethane (Saloon, Traveller, Convertible)

Rear Spring / Shackle Pin, Plate & Bush Kit - Polyurethane (Saloon, Traveller, Convertible)

Rear Spring / Shackle Pin, Plate & Bush Kit - Polyurethane (Saloon, Traveller, Convertible)

Rear Spring Front Locating Pin

Rear Spring Front Locating Pin. Nut part no. FIX140 (3/8" UNF). Washer part no. FIX158. Original locating pins use 3/8" BSF nut part no. FIX132.

Rear Spring Shackle Bush - Polyurethane (4 Per Car)

Rear Shackle Bush - Polyurethane (4 Required Per Car) This is for the upper shackle (in the chassis) only. Use SUS104A for leaf spring bushes. *We recommend using a little red rubber grease on these bushes* 85 Shore

Rear Spring/Shackle Bush Kit HIGH QUALITY NATURAL RUBBER Saloon/Traveller/Convertible

Rear Shackle Bush - HIGH QUALITY NATURAL RUBBER. as to original spec. These have been remanufactured by Morris Minor Centre (Bath) Ltd and are embossed with MMCIncludes 12 x Spring/shackle bush rubbers.

Rear Spring/Shackle Bush Kit (Polyurethane) Saloon/Traveller/Convertible

Rear Spring/Shackle Bush Kit (Polyurethane) Saloon/Traveller/Convertible. Includes 8 x Spring bushes (RED) and 4 x shackle bushes (BLUE). This kit does not include SUS703A damper link bushes. The BLUE bushes are for the upper shackle (in the chassis) only. *COLOURS MAY VARY*

Rear Spring/Shackle Bush Kit (Polyurethane) Van/Pick-Up

Rear Spring/Shackle Bush Kit (Polyurethane) Van/Pick-Up *COLOURS MAY VARY*

Rear Spring/Shackle Bush Kit (Rubber) Van/Pick-Up

Rear Spring/Shackle Bush Kit (Rubber) Van/Pick-Up

Rear Wheel Bearing (MM & Early Series II Axle)

Rear Wheel Bearing (MM & Early Series II Axle)Suitable for cars with a "split-casing" rear axle used up to December 1953 to chassis no. 2282677. Not suitable for A-type "banjo" axles. For later models use part no. DIF156.

Rear Wheel Bearing Kit (Includes: DIF148/149/150/102+ Genuine FAG Bearing)

Rear Wheel Bearing Kit (Includes: DIF148/149/150/102+Bearing). Later Series II and all Minor 1000. Chassis number 2282677-on. For earlier models use part no. SV136. - Suitable for all Austin A30 & A35 Models.

Rear Wheel Stud (42mm) 2A7089

Rear Wheel Stud - 42mm long. For front wheels use 37mm studs part no. SUS175.

Repair Sleeve for Differential Pinion Oil Seal Wear

Repair Sleeve for Rear Axle Oil Seal Wear

Repair sleeve for rear axle oil seal. Only suitable for cars from chassis number 228267 (Dec 1953) onwards.

Replacement Telescopic Damper (GAS) EACH ***SEE PRODUCT INFORMATION***

Telescopic Damper (GAS) EACH - Not suitable for Van/Pick-up rear fitment. Replacement damper for the items used in SUS190A & SUS730A kits, nitrogen gas pressurisation improves damping and ride quality over conventional oil dampers. Can be used to as an upgrade over the SUS750 oil damper used in SUS190 & SUS730 kits.MMCBATH PART NO('S):OWN116/03

Replacement Telescopic Damper (OIL) EACH ***SEE PRODUCT INFORMATION***

Telescopic Damper (OIL) EACH *NOT SUITABLE FOR VAN & PICK-UP REAR*. Replacement damper for the items used in SUS190 & SUS730 kits.

Replacement Telescopic Damper (SPAX ADJUSTABLE) EACH ***SEE PRODUCT INFORMATION***

Telescopic Damper (SPAX ADJUSTABLE) EACH *NOT SUITABLE FOR VAN & PICK-UP REAR*. Replacement damper for the items used in SUS190B & SUS730B kits. Can be used to as an upgrade over the oil and gas versions of the conversion kits (SUS750 & SUS750A).

Replacement Telescopic Damper (SPAX Coil-Over Gas) EACH ***SEE PRODUCT INFORMATION***

SPAX Coil-Over Gas Damper EACH *NOT SUITABLE FOR VAN & PICK-UP REAR*

Rubber Bush-Link To Chassis (2 Required Per Side) ACA5252

Rubber Bush-Link To Chassis (2 Required Per Side)

Rubber Bush-Rear Damper (Van/Pick-Up) 4 Required Per Damper (EACH)

Rubber Bush-Rear Damper (Van/Pick-Up) 4 Required Per Damper (Each)

Shim - Outer Bearing .003" (0.076mm) (1G7261)

Shim - Outer Bearing .003" (0.076mm) (1G7261)

Shim - Outer Bearing .005" (0.127mm) (1G7262)

Shim - Outer Bearing .005" (0.127mm) (1G7262)

Shim - Outer Bearing .010" (0.254mm) (ATB7105)

Shim - Outer Bearing .010" (0.254mm) (ATB7105)

Shim - Outer Bearing .020" (0.508mm) (ATB7107)

Shim - Outer Bearing .020" (0.508mm) (ATB7107)

Spacer-Differential-Crushable

Spring Bush-Front (Polyurethane) Van/Pick-Up 2 Required Per Side

Spring Bush-Front (Polyurethane) Van/Pick-Up 2 Required Per Side (Each)

Spring Bush-Front (Rubber) Van/Pick-Up 2 Required Per Side (Each)

Spring Bush-Front (Rubber) Van/Pick-Up 2 Required Per Side (Each)

Stud - Differential Bearing Cap (51K886)

Stud - Differential Bearing Cap (51K886)

SUPERFLEX Rear Spring Bush - Polyurethane ***SET OF 4***

Supplied with Grease

Telescopic Damper Conversion Kit-Rear (GAS)

Telescopic Damper Conversion Kit-Rear (GAS) *NOT SUITABLE FOR VAN & PICK-UP*

Telescopic Damper Conversion Kit-Rear (OIL)

Telescopic Damper Conversion Kit-Rear (OIL) *NOT SUITABLE FOR VAN & PICK-UP*

Telescopic Damper Conversion Kit-Rear (SPAX ADJUSTABLE)

Telescopic Damper Conversion Kit-Rear (SPAX ADJUSTABLE) *NOT SUITABLE FOR VAN & PICK-UP*

Telescopic Rear Damper/Shock Absorber (Van/Pick-Up) Each

Telescopic Rear Damper/Shock Absorber (Van/Pick-Up) Each

Telescopic Rear Damper/Shock Absorber (Van/Pick-Up) PAIR

Telescopic Rear Damper/Shock Absorber (Van/Pick-Up) PAIR

Thrust Washer-Differential Pinion (.035") 2A7062

Thrust Washer-Differential Pinion (.035") 2A7062

Thrust Washer-Differential Pinion (.054") 2A7062Z

Thrust Washer-Differential Pinion (.054") 2A7062Z

U Bolt - Axle - 5 Leaf Spring (ACA5497) (2 Required Per Spring)

U Bolt - Axle - 5 Leaf Spring (ACA5497) (2 Required Per Spring)

U Bolt - Axle - 7 & 8 Leaf Spring (AAA4047) (2 Required Per Spring)

U Bolt - Axle - 7 & 8 Leaf Spring (AAA4047) (2 Required Per Spring)Please Note. This part number was changed from SUS709 to SUS729 on 06.10.08The old part number SUS709 is no longer in use.

Washer-Bearing Packing (0.002") (0.051mm) (2K7779)

Washer-Bearing Packing (0.002") (.051mm) (2K7779)

Washer-Bearing Packing (0.003") (0.076mm) (ATA7269)

Washer-Bearing Packing (0.003") (0.076mm) (ATA7269)

Washer-Bearing Packing (0.004") (0.102mm) (2K7778)

Washer-Bearing Packing (0.004") (0.102mm) (2K7778)

Washer-Bearing Packing (0.010") (0.254mm) (2A7271)

Washer-Bearing Packing (0.010") (0.254mm) (2A7271)

Washer-Thrust Differential Wheel (ATA7039) FIBRE TYPE

Washer-Thrust Differential Wheel (ATA7039) FIBRE TYPE

Washer-Thrust Differential Wheel (ATA7039) PHOSPHOR BRONZE

Washer-Thrust Differential Wheel (ATA7039) PHOSPHOR BRONZE - As original.