Rear Seat Foam Padding Kit

This padding can be used to cover the spring casing of the Morris Minor rear seat when fitting brand new seat covers. This is enough to cover both the squab and the base.

Spring Hanger-Front (Less Plate) L/H *SRI LANKAN*

New Old Stock, Made in Sri Lanka - To Clear

Rear Spring Hanger Repair Kit R/H - With Flat Inner Wing Section U.K. Made By ESM

Rear Spring Hanger Repair Kit R/H - With Flat Inner Wing Section U.K. Made By ESM

Rear Spring Hanger Repair Kit L/H - With Flat Inner Wing Section U.K. Made By ESM

Rear Spring Hanger Repair Section L/H - With Flat Inner Wing Section U.K. Made By ESM

Rear Spring Hanger Repair Section L/H U.K.

Rear Spring Hanger Repair Section L/H U.K. Made By ESM

Rear Spring Hanger Repair Section R/H U.K

Rear Spring Hanger Repair Section R/H U.K Made By ESM

Spring Hanger To Rear Bump Stop Repair Panel R/H LMC Hadrian UK Made

Spring Hanger To Rear Bump Stop Repair Panel R/HManufactured from LMC Hadrian tooling. UK made from high quality steel of correct gauge.

Rear Spring Front Mount Repair Stud (Van & Pick Up) UK Made

Rear Spring Front Mount Repair Stud (Van & Pick Up) UK MadeNut - FIX134A

Chassis Cross Member Assembly with Spring Mounting Pins (Van & Pick Up) (AAA3386)

Chassis Cross Member Assembly with Spring Mounting Pins (Van & Pick Up) (AAA3386)

Set Screw - 5/16" UNF x 3/4" (Backplate to Block)

5/16" UNF x 3/4" high tensile Set Screw that is suitable for fitting the engine back plate to the block (use with FIX157 spring washer).

Spring Washer 1/2"

Spring Washer 1/2"

Nut-3/8" BSF (Fits SUS719)

Nut-3/8" BSF - Fits SUS719 Leaf spring rear shackle pin.

Nut-3/8" UNF

Nut-3/8" UNF (Fits Front Locating Pin On Rear Spring)

Spring Washer 1/4"

Spring Washer 1/4"

Spring Washer 5/16"

Spring Washer 5/16". MMCBath Part Number equivalents: 10M152 MNT102 MNT113 MNT125 MNT156 9G133 9G138 9G225 9G237 9G263 10G217 10G229 10G247 10G253 RAD116 CBS112.

Spring Washer 3/8"

Spring Washer 3/8"

Spring Washer 3/16"

Spring Washer 3/16"

Bolt - 5/16" UNF x 1.1/4" (Engine To Gearbox & Concave Engine Side Plates)

Bolt - 5/16" UNF x 1.1/4". Fits engine to gearbox (8 x required). Use with FIX139 x 3 and FIX157 x 8. For back-plate to engine block bolts see FIX206 and FIX157 spring washers (7x of each required).

Spring Washer 7/16"

Spring Washer 7/16"

Windscreen Wiper Arm Replacement Spring R/H or L/H (Not Split Screen)

Windscreen Wiper Arm Replacement Spring R/H or L/H (Not Split Screen) - Overall length (including hooks) approx. 62mm.

Rear Spring Hanger Cover Plate

Rear Spring Hanger Cover Plate

Spring Hanger To Rear Bump Stop Repair Panel L/H LMC Hadrian UK Made

Spring Hanger To Rear Bump Stop Repair Panel L/HManufactured from LMC Hadrian tooling. UK made from high quality steel of correct gauge.

Spring Hanger-Front (On Plate) R/H LMC Hadrian UK Made

Spring Hanger-Front (On Plate) R/HManufactured from LMC Hadrian tooling. UK made from high quality steel of correct gauge.

Spring Hanger-Front (On Plate) L/H LMC Hadrian UK Made

Spring Hanger-Front (On Plate) L/HManufactured from LMC Hadrian tooling. UK made from high quality steel of correct gauge.

Spring Hanger-Front (Less Plate) L/H LMC Hadrian UK Made

Spring Hanger-Front (Less Plate) L/HManufactured from LMC Hadrian tooling. UK made from high quality steel of correct gauge.

Spring Hanger-Front (Less Plate) R/H LMC Hadrian UK Made

Spring Hanger-Front (Less Plate) R/HManufactured from LMC Hadrian tooling. UK made from high quality steel of correct gauge.

Door Handle Return Spring - 4 DOOR R/H FRONT or L/H REAR

Door Handle Return Spring - 4 DOOR R/H FRONT or L/H REAR

Door Handle Return Spring - 4 DOOR L/H FRONT or R/H REAR

Door Handle Return Spring - 4 DOOR L/H FRONT or R/H REAR

Spring-Bonnet Prop (ADA2466)

Spring-Bonnet Prop (ADA2466)

Spring-Bonnet Safety Catch (ADA2490)

Spring-Bonnet Safety Catch (ADA2490)

Bracket-Anti-Rattle Spring To Release Rod

Bracket-Anti-Rattle Spring To Release Rod

Bonnet Catch Return Spring

Bonnet Catch Return Spring

Spring (Anti-Rattle) Bonnet Release Rod

Spring (Anti-Rattle) Bonnet Release Rod

Front Panel / Grille Surround Panel 1954 Onwards (Steel-Genuine Heritage)

Front Panel / Grille Surround Panel 1954 Onwards (Steel-Genuine Heritage). The best available of this panel. Recommended. screws lower FIX126 x7washers FIX170 x14spring washer FIX155 x7nuts=FIX127 x7