Van/Pick-Up Exhaust Mounting (As Original) with Sleeve

Door To Body Draught Excluder (MID-BLUE) CONVERTIBLE

Door Locating Socket (Fits Plate & Pin) SRI-LANKAN

SECOND-HAND Steering Arm L/H - 8cwt Van/Pick-Up Only

Can be used with SUS211 as an upgrade to the standard king-pin assembly.

SECOND-HAND Steering Arm R/H - 8cwt Van/Pick-Up Only

Can be used with SUS210 as an upgrade to the standard king-pin assembly.

SET OF 5 Road Wheel 3J x 14" Standard Minor (3" Wide) Painted in SILVER ( ACA8264 ) ( LP917 )

SET OF 5 Road Wheels - Standard Minor 1000 3J x 14" Brand New and powder coated in SILVER *Not suitable for MM or Series II* These are the same as original Minor wheels and are designed to have an inner tube fitted. Note: The new 4.5J 14" wheels Part No WHL100 have been manufactured with the addition of an inner bead that does allow for fitting of tubeless tyres without inner tubes.All wheels are given an Electrophoretic coating ( E Coating ). A process whereby the wheel is fully submerged into an electro paint bath whilst applying an electrical charge to the wheel and opposing charge through the bath. The resultant coating, black in colour, has an extremely good coverage particularly in seams and is very tough. Following the Ecoating the wheels are powder coated in SILVER. This process involves the spraying on of the powder coat before heating to cure.

Road Wheel 3J x 14" Standard Minor 1000 (3" Wide) Painted in SILVER ( ACA8264 ) ( LP917 )

Road Wheel - Standard Minor 1000 3J x 14" Brand new in Silver coating. *Not suitable for MM or early Series II* These are the same as original Minor wheels and are designed to have an inner tube fitted. Note: The new 4.5J 14" wheels Part No WHL100 have been manufactured with the addition of an inner bead that does allow for fitting of tubeless tyres without inner tubes.All wheels are given an Electrophoretic coating ( E Coating ). A process whereby the wheel is fully submerged into an electro paint bath whilst applying an electrical charge to the wheel and opposing charge through the bath. Following the E Coating the wheels are powder coated in Silver. This process involves the spraying on of the powder coat before heating to cure.Price is for one wheel ex. VAT

Set of 4 Front & 2 Rear Brake Cylinders - PATTERN *Minor 1000 1954-71 models ONLY*

Pattern Rear Cylinders (RBK106A) with Pattern Front Cylinders (FBK105Z & FBK106Z) Includes bleed screws.

Set of 4 Front Brake Cylinders 1954-1971 - PATTERN *NOT MM & EARLY SERIES II*

Suitable for chassis no. 228267 (December 1953) onwards. For earlier cars use FBK128A/129A.

Stud - Carburettor to Manifold - 948/1098cc (CHS2615)

3/8" UNC/UNF *** Not MM & Series II ***

Light Unit/Reflector (Halogen Bulb Type) LUCAS

Lucas 7 inch Headlight, Rhd, Main and Dip. H4.

Door Locating Plate With Pin (Fits DCH135) SRI-LANKAN

Made in Sri-Lanka. ) Screws=FIX125 x2

Clevis Pin Kit - Bonnet Prop

Clevis pin kit with washers & split-pin

"O" Ring - 25D4 Distributor (27H6547)

Rubber "O" Ring - For 25D4 Distributors

Electronic Ignition Kit - 25D4 Distributor (Positive Earth Only)

Electronic Ignition Kit - Compatible with Lucas 25D4 distributors only. Will not fit earlier distributors such as DM2 - please check your distributor before ordering. Vehicle MUST be POSITIVE earth. We advise the use of the uprated Lucas 'Sports' Coil (part no. VAC103LS) with electronic ignition setups.

Condenser (DM2/25D4) RETRONICS

Designed and assembled in the UK using best quality components. Featuring premium grade metallised film capacitors, specifically designed for pulse applications to suppress the spark from the points faster and with greater consistency and reliability. Featuring all copper connections and high strand copper wire sheathed in silicone for vibration dampening, each unit is hand soldered, to provide excellent, long-term conductivity for those owners using standard mechanical points for ignition timing.

Engine Service Kit - 948/1098cc Push-In H.T.Lead Type Cap with H.T. Leads & Coil (With Spin-On Oil Filter)

With a spin-on oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, H.T. leads, coil, points, rotor arm & condenser.

Engine Service Kit - Push-In H.T.Lead Type Cap with H.T. Leads (With Spin-On Oil Filter)

With a spin-on oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, H.T. leads, points, rotor arm & condenser.

Genuine Small Tank O.H.V. Radiator - Fits all models from August 1960 onwards ***B-GRADE***

Brand new Small Tank radiator. Non exchange, manufactured by MMC Bath. The only radiator available that is made using the original B.M.C. tooling with the correct mounting hole positions & fitted with a modern high spec dual core. All components are new with BSF threads as original being used for the mounting bolts (RAD115). Supplied with drain tap & overflow pipe. Also with original warning stencil.This radiator can also be fitted to earlier pre-1960 models, the mountings are exactly the same, it just has a smaller header tank. THESE ARE B-GRADE / SHOP SOILED DUE TO SURFACE CORROSION AND POSSIBLY SMALL DENTS FROM STORAGE

New Uprated Armstrong Front Shock Absorbers / Dampers ( L/H & R/H matching pair) * 2yr Warranty

Apologies for further delays. Expected stock in October. No SUS129/130UPRTD is for a matching pair of brand new Armstrong Uprated Front Shock Absorbers. There is no requirement for an exchange unit and so no surcharge to pay. These new shock absorbers have the same bore size as the uprated rear shocks that we already supply and similarly have a 25% increased capacity. With all new components the new body casting and spindle fully renew the plain bearing for the upper front suspension. Uprated shock absorbers must be fitted in pairs to both hands and not mixed with standard shock absorbers.*Includes a full two year warranty*IMPORTANT NOTE: New shock absorbers / dampers will need to be left to stand upright for 24 hours prior to fitting.

Front Brake Wheel Cylinder L/H 1954-1971 (Pattern) 2 Required (GWC111) *NOT MM & EARLY SERIES II*

Please Note, Repair Kits are not available for these pattern cylinders.

Front Brake Wheel Cylinder R/H 1954-1971 (Pattern) 2 Required (GWC110) *NOT MM & EARLY SERIES II*

Please Note, Repair Kits are not available for these pattern cylinders.

Exhaust O.H.V (Steel) Saloon/Traveller/Convertible ALUMINISED 2-PIECE Klarius

Ignition Coil - Late Type Push-In H.T. Lead (VIPER)

VCS - Viper Dry Ignition Coil Sport in Black finish.Suitable for 12v non ballast ignition systems with points or aftermarket electronic ignition.The Viper Dry Ignition Coil is a modern high performance 3.0 ohm coil designed to replace your traditional oil filled coil.Unlike a traditional coil, the Viper uses a dry resin core instead of oil. This does away with temperamental performance associated with sloshing or dripping fluid, while keeping the same design format of a traditional coil. This resin core is encased in a smart silver painted metal housing, which will fit directly in place of your existing coil. What's more, having a solid dry core means the Viper coil can be mounted on any angle.Designed to out perform even the best oil filled coils, perfect for classic cars that use points or electronic ignition.The Viper Dry Sports Ignition Coil allows you to upgrade your classic car without compromising any of the period styling within the engine bay.A simple upgrade that requires very little mechanical skill to fit.This model replaces Lucas ignition coils with product codes DLB101 and DLB105Features:- Dry coil technology thanks to a resin core- Traditional design for classic looks- Easy to fit in place of your existing coil- Mounting bracket includedBenefits:- Superior performance thanks to consistent cooling- No dripping or leaking oil to worry about- Can be mounted on any angle- Perfect with points or aftermarket electronic ignition systems